| What you're planning | Usual approach |
|---|---|
| Laying new flooring over the top | Often fine if the tiles are intact and stuck down |
| Lifting the tiles | Test first |
| Grinding or sanding the floor or adhesive | Test first. Never sand or grind untested tiles or glue |
| Tiles cracked or breaking up | Test, then cover or remove |
How do I know if floor tiles contain asbestos?
You can't tell by looking. Clues are small square vinyl or thermoplastic tiles, often 9 or 12 inches, in a pre-2000 building, and a black bitumen adhesive underneath. HSE's diagrams list vinyl floor tiles with asbestos paper backing and bitumen adhesive as a common material in homes. The only way to know is a sample tested at a UKAS-accredited laboratory.
Can I cover asbestos floor tiles?
Often, yes. If the tiles are intact and firmly stuck down, covering them with new flooring is usually the least disruptive option. Avoid nailing or screwing through them, and keep a note that they're there for anyone working on the floor later.
Who can remove asbestos floor tiles?
Removing vinyl floor tiles is usually non-licensed work, but it still needs trained people and controls: tiles lifted whole where possible, kept damp, and the adhesive dealt with carefully. Grinding or sanding the floor spreads fibres and shouldn't be done on untested material.
Questions
Does black floor tile glue contain asbestos?
It can. Bitumen adhesives under old floor tiles are listed by HSE as a possible asbestos material. Test it before scraping, grinding or sanding.
Are cracked asbestos floor tiles dangerous?
Vinyl tiles hold fibres tightly, so the risk is low if they're left alone. Avoid breaking them up further, and get them tested before deciding to cover or remove them.
Sources: HSE diagrams of where asbestos can occur in buildings; HSE guidance on non-licensed work. Checked 16 November 2026. This is general information, not legal advice.