| What you're planning | Do this first |
|---|---|
| Living with it, no work planned | Nothing. Leave it alone and don't sand or scrape it |
| Painting over it | Usually fine: painting doesn't disturb it |
| Drilling a few holes, fitting lights | Test first, or treat it as asbestos while you drill |
| Skimming, scraping, removing or knocking down the ceiling | Test or survey first, then plan removal |
Does my Artex contain asbestos?
If it went up before 2000, it might. Artex is a brand name, but people use it for any textured coating, and many were made with asbestos until it was banned. You can't tell by looking or by the pattern. The only way to know is a sample tested at a UKAS-accredited laboratory.
If the house was built or refurbished after 2000, an asbestos textured coating is unlikely.
Is it safe to live with an asbestos textured ceiling?
Generally yes, if it's in good condition and left alone. HSE says asbestos in good condition is often best left where it is. The risk comes from disturbing it: sanding, scraping, drilling lots of holes, or bringing the ceiling down.
Can I plaster or skim over Artex?
Skimming over a textured coating usually involves some preparation, such as knocking off the peaks, which disturbs it. Test it first. If it's clear, carry on. If it contains asbestos, a firm can advise whether it's better to remove it or seal it under new boards.
Who can remove asbestos textured coatings?
Under HSE's rules, small jobs like drilling a few holes are non-licensed work. Larger-scale removal, usually by steaming or gel-based methods, is notifiable non-licensed work, which means extra controls, records and notification by the contractor. It's not a DIY job.
In Wales, asbestos removed by a contractor is hazardous waste under the Hazardous Waste (Wales) Regulations 2005, and it needs a consignment note when it leaves your property. Before anyone takes it away, check they're a registered waste carrier on Natural Resources Wales's public register.
Questions
How much asbestos is in Artex?
Usually only a small proportion, but that's not a reason to disturb it. The amount doesn't change the advice: test before sanding, scraping or removing it.
Can I sand or scrape an Artex ceiling?
Not until it's been tested. Sanding and scraping are exactly the kind of work that releases fibres if it contains asbestos.
Can I paint over Artex?
Yes, painting over an intact textured coating doesn't disturb it and is generally fine.
Sources: HSE guidance on asbestos textured coatings, licensing and householder advice; Natural Resources Wales. Checked 16 November 2026. This is general information, not legal advice.